O. Coussy, V. Baroghel-bouny, P. Dangla, and M. Mainguy, Evaluation de la perméabilitéà l'eau liquide des bétonsà partir de leur perte de masse durant le séchage, Revue française de génie civil, vol.5, issue.2-3, pp.269-284, 2001.

C. Perlot, J. Verdier, and M. Carcassès, Influence of cement type on transport properties and chemical degradation : Application to nuclear waste storage, Materials and structures, vol.39, issue.5, pp.511-523, 2006.
URL : https://hal.archives-ouvertes.fr/hal-02064693

Z. Lafhaj, M. Goueygou, A. Djerbi, and M. Kaczmarek, Correlation between porosity, permeability and ultrasonic parameters of mortar with variable water/cement ratio and water content, Cement and Concrete Research, vol.36, issue.4, pp.625-633, 2006.
URL : https://hal.archives-ouvertes.fr/hal-00140381

A. M. Neville, A. M. Neville, A. M. Neville, and A. M. Neville, Propriétés des bétons, Eyrolles, 2000.

R. F. Feldman and P. J. Sereda, A model for hydrated portland cement paste as deduced from sorption-length change and mechanical properties, Materiaux et construction, vol.1, issue.6, pp.509-520, 1968.

M. Lion, Influence de la température sur le comportement poromécanique ou hydraulique d'une roche carbonatée et d'un mortier. etudes expérimentales, 2004.

V. Picandet, Influence dun endommagement mécanique sur la perméabilité et sur la diffusivitÃ? hydrique des béton, 2001.

. Grasley, Relative humidity in concrete, Concrete international, vol.28, issue.10, pp.51-57, 2006.

F. Collet, F. Achchaq, K. Djellab, L. Marmoret, and H. Beji, Water vapor properties of two hemp wools manufactured with different treatments, Construction and Building Materials, vol.25, issue.2, pp.1079-1085, 2011.
URL : https://hal.archives-ouvertes.fr/hal-00709238

K. Maekawa, T. Ishida, and T. Kishi, Multi-scale modeling of structural concrete, 2008.

V. Baroghel-bouny, Caractérisation microstructurale et hydrique des pâtes de ciment et des bétons ordinaires età très hautes performances, 1994.

E. Guyon, J. Hulin, L. Petit, and P. G. De-gennes, Hydrodynamique physique, EDP sciences Les Ulis, 2001.

H. Renon, Calcul sur ordinateur deséquilibres liquide-vapeur et liquide-liquide, vol.17, 1971.

J. Piasta, Heat deformations of cement paste phases and the microstructure of cement paste, Matériaux et Construction, vol.17, issue.6, pp.415-420, 1984.

P. Kalifa and F. Menneteau, Mesures de pression, température et perte en masse dans les bétonsà hautes températures, 2000.

U. Diederichs, U. Jumppanen, and V. Pentalla, Behaviour of high strength concrete at elevated temperatures, Report, vol.92, p.72, 1992.

J. Mindeguia, Contribution expérimentaleà la compréhension des risques d'instabilité thermique des bétons, 2009.

I. Hager, Comportementà haute température des bétonsà haute performancé evolution des principales propriétés mécaniques, 2004.

R. Felicetti and P. G. Gambarova, Heat in concrete : Special issues in materials testing, Studi e ricerche-Politecnico di Milano. Scuola di specializzazione in costruzioni in cemento armato, pp.121-138, 2003.

F. Belhamel, A. Lazazi, and F. Kharchi, Contributionà lanalyse de la variation de lenergie de rupture des bétons sous gradient thermique

Z. P. Bazant and P. C. Prat, Effect of temperature and humidity on fracture energy of concrete, ACI Materials Journal, vol.85, issue.4

J. Maréchal, Le fluage du béton en fonction de la température, Matériaux et Construction, vol.2, issue.2, pp.111-115, 1969.

H. Carré and P. Pimienta, bending test at high temperature

A. Amirkhanian, D. Spring, J. Roesler, K. Park, and G. Paulino, Disk-shaped compact tension test for plain concrete, Proceedings of the Transportation and Development Institute Congress, pp.688-698, 2011.

F. Brue, Rôles de la température et de la composition sur le couplage thermo-hydromécanique des bétons, 2009.

D. Chen, Modélisation du comportement hydromécanique d'un mortier sous compression et dessiccation, vol.1, 2005.

W. Chen, Etude expérimentale de la perméabilité du béton sous conditions thermiques et hydriques variables, 2011.

C. Gallé, Effect of drying on cement-based materials pore structure as identified by mercury intrusion porosimetry : a comparative study between oven-, vacuum-, and freeze-drying, Cement and Concrete Research, vol.31, issue.10, pp.1467-1477, 2001.

W. Chen, Water retention and gas relative permeability of two industrial concretes, Cement and Concrete Research, vol.42, issue.7, pp.1001-1013, 2012.
URL : https://hal.archives-ouvertes.fr/hal-00702563

, Liants hydrauliques -Ciments courants -Composition, spécifications et critéres de conformité, Norme française, pp.15-301, 1994.

, EN197-1, Ciment -Partie 1 : composition, spécifications et critéres de conformité des ciments courants, Norme française, 2012.

F. Adenot and M. Buil, Modelling of the corrosion of the cement paste by deionized water, Cement and Concrete Research, vol.22, issue.2-3, pp.489-496, 1992.

H. L. Chatelier, O. Boudouard, M. Des-températuresélevées, G. Carré, and C. Naud, , 1900.

A. , Méthodes recommandées pour la mesure des grandeurs associéesà la durabilité, Compte rendu des journées techniques AFPC-AFREM, Durabilité des bétons

G. Arliguie and H. Hornain, Grandeurs associéesa la durabilité des bétons grandubé, Presses Ecole Nationale Ponts et Chaussées

P. Aïtcin, Bétons haute performance, 2001.

J. Baron, A. Desdevises, M. Buil, C. Detriche, C. Vernet et al., La durabilité des bétons, 1992.

A. Lobet, Influence des paramètres de composition des matériaux cimentaires sur les propriétés de transfert, 2003.

L. Basheer, P. Basheer, and A. Long, Influence of coarse aggregate on the permeation, durability and the microstructure characteristics of ordinary portland cement concrete, Construction and Building Materials, vol.19, issue.9, pp.682-690, 2005.

G. Villain and M. Thiery, Impact of carbonation on microstructure and transport properties of concrete, Proceedings of, vol.10, pp.1-8, 2005.

E. Masad, B. Muhunthan, N. Shashidhar, and T. Harman, Internal structure characterization of asphalt concrete using image analysis, Journal of computing in civil engineering, vol.13, issue.2, pp.88-95, 1999.

Y. F. Houst, Diffusion de gaz, carbonatation et retrait de la pâte de ciment durcie, 1993.

O. Amiri, A. Ait-mokhtar, and P. Dumargue, Optimisation de l'exploitation de l'essai d'électrodiffusion d'ions chlorures dans le béton, Revue française de génie civil, vol.4, issue.2-3, pp.161-173, 2000.

A. Chaigne, Ondes acoustiques, Editions Ecole Polytechnique, 2002.

O. Francy, Modélisation de la pénétration des ions chlorures dans les mortiers partiellement saturés en eau, 1998.

K. K. Aligizaki, Pore structure of cement-based materials : testing, interpretation and requirements, 2005.

S. Brunauer, P. H. Emmett, and E. Teller, Adsorption of gases in multimolecular layers, Journal of the American chemical society, vol.60, issue.2, pp.309-319, 1938.

L. Klinkenberg, The permeability of porous media to liquids and gases, in : Drilling and production practice, 1941.

C. Pc, Flow of gases through porous media, 1956.

J. G. Berryman and S. C. Blair, Kozeny-carman relations and image processing methods for estimating darcy s constant, Journal of Applied Physics, vol.62, issue.6, pp.2221-2228, 1987.

. Villain, Mesure de la perméabilité aux gaz en fonction du taux de saturation des bétons, Revue française de génie civil, vol.5, issue.2-3, pp.251-268, 2001.

X. Chen, Effet du chauffage sur le comportement mécanique et poro-mécanique de matériaux cimentaires : propriétés hydrauliques et changements morphologiques, 2009.

L. Greenspan, Humidity fixed points of binary saturated aqueous solutions, Journal of Research of the National Bureau of Standards, vol.81, issue.1, pp.89-96, 1977.

M. Goual, A. Bali, F. De-barquin, R. Dheilly, and M. Quéneudec, Isothermal moisture properties of clayey cellular concretes elaborated from clayey waste, cement and aluminium powder, Cement and concrete research, vol.36, issue.9, pp.1768-1776, 2006.

P. K. Mehta and P. J. Monteiro, Concrete : microstructure, properties, and materials, vol.3, 2006.

J. Monlouis-bonnaire and B. Perrin, Modélisation numérique des transferts couplés air-eau-sel dans des matériaux cimentaires et des terres cuites, Thermique des systèmes. Colloque universitaire franco-québécois, pp.265-272, 2001.

Y. Xi, Z. P. Ba?ant, L. Molina, and H. M. Jennings, Moisture diffusion in cementitious materials moisture capacity and diffusivity, Advanced Cement Based Materials, vol.1, issue.6, pp.258-266, 1994.

M. Castellote, C. Alonso, C. Andrade, X. Turrillas, and J. Campo, Composition and microstructural changes of cement pastes upon heating, as studied by neutron diffraction, Cement and concrete research, vol.34, issue.9, pp.1633-1644, 2004.

H. Lien and F. Wittmann, Coupled heat and mass transfer in concrete elements at elevated temperatures, Nuclear engineering and design, vol.156, issue.1, pp.109-119, 1995.

G. England, R. Greathead, and S. Khan, Influence of high temperature on water content, permeability and pore pressures in concrete, Transactions of the 11th international conference on structural mechanics in reactor technology, 1991.

E. Crispino, C. Fizzotti, and R. Gasparini, Irradiation effects on reactor structural materials, AGIP Nucleare

, Ente Nazionale per l'Energia Elettrica, 1971.

J. , Contributionà l'étude des propriétés thermiques et mécaniques du béton en fonction de la température, vol.23, pp.123-145, 1970.

Z. P. Bazant and M. F. Kaplan, Concrete at high temperatures : material properties and mathematical models, Longman Group Limited, 1996.

C. and L. Borderie, Phénomènes unilatéraux dans un matériau endommageable : modélisation et applicationà l'analyse de structures en béton, 1991.

. D04-committee, Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry, 2013.

J. Cummings, Étude de la propagation des fissures, 2000.

H. Kim, M. P. Wagoner, and W. G. Buttlar, Numerical fracture analysis on the specimen size dependency of asphalt concrete using a cohesive softening model, Construction and Building Materials, vol.23, issue.5, pp.2112-2120, 2009.

S. Fichant, G. Pijaudier-cabot, and C. L. Borderie, Continuum damage modelling : Approximation of crack induced anisotropy, Mechanics Research Communications, vol.24, issue.2, pp.109-114, 1997.

Y. He, Rapid thermal conductivity measurement with a hot disk sensor : Part 1. theoretical considerations, Thermochimica acta, vol.436, issue.1, pp.122-129, 2005.

Y. Jannot and Z. Acem, A quadrupolar complete model of the hot disc, Measurement science and technology, vol.18, issue.5, p.1229, 2007.

S. E. Gustafsson, Transient hot strip techniques for measuring thermal conductivity and thermal diffusivity, The Rigaku Journal, vol.4, issue.1, pp.16-28, 1987.

H. Darcy, Les fontaines publiques de la ville de Dijon : exposition et application..., Victor Dalmont, 1856.

M. Choinska, Effets de la température, du chargement mécanique et de leurs interactions sur la perméabilité du béton de structure

E. I. Nf, 13788 : 2001 performance hygrothermique des composants et parois de bâtiments, Température superficielle intérieure permettant déviter l humidité superficielle critique et la condensation dans la masse, 2001.

L. H. Nguyen, Béton de structureà propriétés d'isolation thermique améliorées : approche expérimentale et modélisation numérique, 2013.

C. Clauser and E. Huenges, Thermal conductivity of rocks and minerals, Rock physics & phase relations : A handbook of physical constants, pp.105-126, 1995.

E. C. Robertson, Thermal properties of rocks, Tech. rep., US Geological Survey, 1988.

M. L. Ramires, C. A. De-castro, Y. Nagasaka, A. Nagashima, M. J. Assael et al., Standard reference data for the thermal conductivity of water, Journal of Physical and Chemical Reference Data, vol.24, issue.3, pp.1377-1381, 1995.

K. Stephan and A. Laesecke, The thermal conductivity of fluid air, Journal of physical and chemical reference data, vol.14, issue.1, pp.227-234, 1985.

Y. Mualem, A new model for predicting the hydraulic conductivity of unsaturated porous media, Water Resour. Res, vol.12, issue.3, pp.513-522, 1976.

B. Barnes, S. Diamond, and W. Dolch, The contact zone between portland cement paste and glass aggregate surfaces, Cement and Concrete Research, vol.8, issue.2, pp.233-243, 1978.

M. Hoshino, Relation between bleeding, coarse aggregate, and specimen height of concrete, Materials Journal, vol.86, issue.2, pp.185-190, 1989.

V. Baroghel-bouny, Caractérisation des pâtes de ciment et des bétons-méthodes, analyse, interprétations

B. Zhang, Effects of moisture evaporation (weight loss) on fracture properties of high performance concrete subjected to high temperatures, Fire Safety Journal, vol.46, issue.8, pp.543-549, 2011.

F. Benboudjema, Modélisation des déformations différées du béton sous sollicitations biaxiales. application aux enceintes de confinement de bâtiments réacteurs des centrales nucléaires, 2002.

M. Matallah, C. L. Borderie, and O. Maurel, A practical method to estimate crack openings in concrete structures, International Journal for Numerical and Analytical Methods in Geomechanics, vol.34, issue.15, pp.1615-1633, 2010.

, Cast3m finite element code, Tech. rep., French Alternative Energies and Atomic Energy Commission

M. T. Van-genuchten, A closed-form equation for predicting the hydraulic conductivity of unsaturated soils, Soil science society of America journal, vol.44, issue.5, pp.892-898, 1980.

V. Baroghel-bouny, M. Mainguy, and O. Coussy, Isothermal drying process in weakly permeable cementitious materials-assessment of water permeability, International Conference on Ion and Mass Transport in Cement-Based Materials, pp.59-80, 1999.

A. Abbas, M. Carcasses, and J. Ollivier, Gas permeability of concrete in relation to its degree of saturation, Materials and structures, vol.32, issue.1, pp.3-8, 1999.

L. Parrott and C. Z. Hong, Some factors influencing air permeation measurements in cover concrete, Materials and Structures, vol.24, issue.6, pp.403-408, 1991.

A. W. Bishop and G. Blight, Some aspects of effective stress in saturated and partly saturated soils, Geotechnique, vol.13, issue.3, pp.177-197, 1963.

P. Souyris, Prédiction des propriétés poro-élastiques et de sorption d'eau en fonction du développement de la microstructure des matériaux cimentaires, 2012.

S. Granet, Modéles de comportement thhm, Documentation de référence Code Aster 7

E. Lorentz, S. Cuvilliez, and K. Kazymyrenko, Convergence of a gradient damage model toward a cohesive zone model, Comptes Rendus Mécanique, vol.339, issue.1, pp.20-26, 2011.

, Modélisation mécanique de l'essai DCT par le code Aster Le modèle endo fiss utilisé pour la modélisation de l'essai DCT est en cours de développement par Eric Lorentz

. Ce and A. Dans-le-code, Les données d'entrée sont : des paramètresélastiques E et ?, trois paramètres pour l'endommagement F t , F c et G f , une largeur de bande d'endommagement qui dépend de la taille des mailles et deux paramètres P et Q

, Uneétude paramétrique aété faite pour valider le modèle endo fiss et bien comprendre l'influence de ces paramètres

, Les paramètres du modèle endo fiss utilisées sont ceux obtenus par un essai DCT : les paramètresélastique E= 18 GPa et ? = 0,18, et les paramètres d'endommagement F t = 2,47 MPa et G f = 66 N/m. les paramètres largeur bande